Enrich EMMS Online Help

Consolidated definitions table  

Consolidated bills are produced using consolidated bill definitions. The definition identifies the customer to be billed, the frequency of billing, and the charges to be included. Two main areas control whether or not an Enrich application invoice will be selected for consolidation: the billing definition and the billing definition line details.

The definition detail lines further determine which Enrich application invoices will be selected for consolidation. They also define the level of detail for printing and the order in which charges are printed.

The customer, unit, and charge type from the invoice line must match that on the definition line in order for the invoice to be selected for consolidation. For invoice selection, it does not matter which definition the invoice matches, as long as it is matched to at least one.

A customer or customer list must always be specified. If the unit or charge type is left blank, then all units or all charge types for the customer will be selected. You may choose to specify an individual customer, unit, and charge type, or use a list -- customer, equipment, or charge type lists. Lists allow you to select multiple customers, multiple units, or many charge types. They may also allow you to further refine your invoice selection by other criteria such as equipment group or reason code.

Note that a consolidated definition cannot be deleted if there are associated invoices.

1. At the EMMS main menu, select Customer | Consolidated Billing | Consolidated Definitions.
   • The Work With Consolidated Definitions by Customer display screen appears.
2. To copy a consolidation definition:
   • Right-click on the definition and select Copy.
     • The Edit Consolidation List change screen appears for the new definition.
3. To add a consolidation definition:
   1. Click Add .
      • The Edit Consolidation List add screen appears. The top part of the screen is the billing definition. The bottom part is the billing definition detail lines.
   2. Type in a description of the new billing definition.
   3. Fill in the fieldsfields as required.

      1st Billing Date identifies when the first ever consolidated invoice will be produced for this definition. It is required.

      Bill Group is a particular billing group to which this definition applies. You can click on the Prompt button to select the billing group from a list.

      Billing Address# is the customer's billing address to be used with this definition. You can click on the Prompt button to select the address from a list.

      Billing Customer is the customer that will be billed using this definition. You can click on the Prompt button to select the customer from a list.

      Charge Type is a particular type of charge whose invoices will be included. It is optional. You can right-click in the field and select Prompt to select the charge type from a list.

      Charge Type List is a charge type list whose invoices will be included. It is optional. You can right-click in the field and select Prompt to select the charge type list from a list.

      Customer is a specific customer whose invoices will be included in this definition. One of customer or customer list is required. You can right-click in the field and select Prompt to select the customer from a list.

      Customer List is a customer list whose invoices will be included in this definition. One of customer or customer list is required. You can right-click in the field and select Prompt to select the customer list from a list.

      Detail controls printing of the individual invoice line details. When set to Yes, the greatest amount of detail is printed and the invoice may be many pages. When set to No, the individual invoice line details are not printed; summary and total information is still available. You can right-click in the field and select Prompt to select the detail level from a list.

      Frequency identifies how often the consolidated invoices are produced. You can click on the Prompt button to select the frequency from a list. Valid values are:

      • 0 - On Demand
      • 1 - Weekly
      • 2 - Monthly
      • 3 - 28 Days

      Invoice Dates are start and end dates that determine the Enrich application invoices to be processed. The original invoice date must fall within this range in order for the invoice to be selected for consolidation. The start date is required. If the second date, or termination date, is left blank, all invoices from the start date forward may be selected for consolidation.

      Last Billed identifies when the most recent consolidated invoice was produced with this definition and, along with frequency, controls when the next consolidated invoice will be produced for it.

      Ln flags whether totals should be printed for the definition line. This option may be easier to work with on the Change Consolidation Line screen. You can right-click in the field and select Prompt to select the flag from a list.

      Override Billing Cutoff Date - if a date is entered here,then this date plus the frequency will be used as the billing cutoff date for the next invoice. The override billing cutoff date will be updated each time a consolidated billing is run, similar to the Last Billed date.

      *Note: If this is the first invoice generated for the definition, then the override billing cutoff date will be used exactly as is for the billing cutoff date and not adjusted for frequency. If the override billing cutoff date is left blank, then the billing cutoff date will be defaulted to the last billed date plus the frequency.

      The billing cutoff date determines which invoice lines that were already held for consolidation for the definition will be included on the consolidated invoice. Only those invoice lines already held for consolidation that have an invoice date up to or including the cutoff date will be on the consolidated invoice. The billing cutoff date is defaulted to the definition's last billed date plus the billing frequency. This is the legacy functionality prior to the additional override dates being added.

      The billing cutoff date can be overridden from both the consolidated definition and the on-demand billing run. This allows you to offset the date that the invoice is generated from the date used to include charges on the invoice. The offset can be either way, with the cutoff date before the last billed date or after the last billed date.

      If you are delaying billing to include a late invoice, you may specify the cutoff date on the on-demand billing run rather than letting consolidated billing calculate. In this situation you will most likely want to also specify a frequency and billing customer, since this date will be used for ALL invoices generated by the billing run.

      If you routinely want the consolidated invoice to pick up invoice lines that might be billed in advance, you might specify an override billing cutoff date on the consolidated definition. This allows the invoice to be produced in advance of the charges.

      Override Invoice Date - if a date is entered here, then this date plus the frequency will be used as the invoice date for the next consolidated invoice. The override invoice date will be updated each time a consolidated billing is run, similar to the Last Billed date.

      *Note: If this is the first invoice generated for the definition, then the override invoice date will be used exactly as is for the consolidated invoice date, and not adjusted for frequency. If the override invoice date is left blank, then the invoice date will be defaulted to the last billed date plus the frequency.

      There may be many different original invoice dates for the charges included on a consolidated invoice. However, the consolidated invoice itself must have an invoice date. The consolidated invoice date defaults to the last billed date plus the frequency. This is the legacy functionality prior to the additional override dates being added.

      The consolidated invoice date can be overridden from both the consolidated definition and the on-demand billing run. This allows you to offset the invoice date from the date it was produced. The offset can be either way, with the invoice date before or after the last billed date.

      If you routinely want to offset the consolidated invoice date, then specify an override invoice date on the consolidated definition.

      If you are doing an on-demand billing run to handle special or unique circumstances, you can specify an invoice date on the On Demand screen and it will override the definition settings and be used for ALL invoices generated by that billing run. In this situation, you will most likely want to also specify a frequency and billing customer since this date will be used for ALL invoices generated by the billing run.

      Override Printed Bill To Date - if a date is entered here, then this date plus the frequency will be used ass the billing to date on the next invoice. Also, the billing from date will be calculated as the override printed bill to date plus a day. The override printed bill to date will be updated each time a consolidated billing is run, similar to the Last Billed date.

      *Note: If this is the first invoice generated for the definition, then the override printed bill to date will be used exactly as is for the billing to date, and not adjusted for frequency. The billing from date will be set to the start of the Invoice Date range on the CB definition.

      If the override printed bill to date is left blank on the consolidated definition, then the default values (from cutoff dates) will be used. The billing from date will be set to the cutoff date from the previous consolidated bill for the definition plus a day.

      The printed bill to date is the date printed on the Premium Forms consolidated invoice as the billing to date. The customer will see this date as the ending date for the billing period. This date does not affect the actual charges included on the invoice; it is strictly for presenting information on billing period to the customer. The default value is set from the billing cutoff date and the billing from date is calculated from the previous consolidated invoice cutoff date plus a day. This is considered the legacy functionality and is how Enrich functioned prior to having an override bill to date on the CB definition or on-demand billing run.

      The printed bill to date can be overridden from both the consolidated definition and the on-demand billing run. Use the override on the definition when you want to regularly offset the printed bill to date from the actual cutoff date used to select charges included on the invoice.

      Example: The cutoff date is the 5th since it takes a couple of days to get the charges in the system and processed, but in reality the charges only apply to the 31st of the previous month. You want the invoice billing period to show the 31st. Set the definition dates as:

      • Last Billed: 2008/02/05 (used for the cutoff date)
      • Override Printed BILL TO date: 2008/01/31

      Use the override on the on-demand billing run when you want to set a custom billing to date for one particular billing run. Be careful, as this override date will be used on ALL invoices generated by the billing run.

      Print Seq is a sequential number that determines the order in which the matching charges will print. The lowest print sequence will print first on the consolidated invoice.

      Print Supporting Documents identifies whether or not supporting documents (i.e. copies of the original invoices) should be printed at the same time that the consolidated bill is printed.

      Print Totals - these 5 fields flag whether or not totals should be printed for each of the sort levels. These options may be easier to work with on the Change Consolidation Line screen. You can right-click in the fields and select Prompt to select the flags from a list.

      Separate Invoices identifies whether and how to separate invoices when this definition is used. The Customer PO option only prints backup that belongs to that PO.

      Sort Order is up to 5 sorting levels, which determine the print sequence. If you blank out a sort order field, it will default to 9 - N/A, and the print total and print header options for that sort level will default to No. These options may be easier to work with on the Change Consolidation Line screen. You can right-click in the fields and select Prompt to select the sort items from a list. First level sort can be by:

      • C - customer
      • D - date
      • E - equipment type
      • H - equipment group
      • P - equipment pool
      • R - repair reason
      • S - customer suffix
      • T - type
      • U - unit
      • W - document # (e.g. work order #)

      In addition to the above sorts, second to fifth level sorts can be identified as 9 - N/A.

      Unit is a specific equipment unit whose invoices will be included. It is optional. You can right-click in the field and select Prompt to select the unit from a list.

      Unit List is an equipment list whose invoices will be included. It is optional. You can right-click in the field and select Prompt to select the equipment list from a list.

   4. Click Enter to save the definition.
4. To activate a consolidation definition:
   • Right-click on the definition and select Activate.
     • The status of the definition changes to A and it becomes available for use.
5. To inactivate an active consolidation definition:
   • Right-click on the definition and select Inactivate.
     • If unbilled charges exist for the definition, the Warning Unbilled Charges Exist screen appears.
       • Click Cancel to cancel the inactivation. OR
       • Click Enter to inactivate the definition anyway. The status of the definition changes to I, and it will not be available for use.
6. To work with customer contacts for this definition, click Contacts . The Customer Contacts change screen appears, listing only this customer's consolidation contacts for this definition.

Back to Consolidated Billing Tables