Override program intervals for a unit

1. At the EMMS main menu, select Maintenance | Preventive Maintenance | Programs. The Work With Programs display screen appears.
2. Right-click on the program and select Equipment. The Display Included Equipment Groups screen appears.
3. Right-click on the equipment group and select Display Included Equipment. The Display Included Equipment screen appears.
4. Right-click on the unit and select Interval Override. The Display Item Instance Intervals screen appears.
5. Click Change . The Edit Item Instance Intervals display screen appears.
6. Fill in the fields as required.

   Lead%- program intervals are measured based on minimum and maximum values (e.g. between 800 and 1000 miles) or based on a percent variance (e.g. perform by 800 miles, but it can be done up to 10% early, meaning between 720 and 800 miles). If the interval you are defining will have a percent variance, the percent value (e.g. 10) is entered here. If the interval is to have minimum and maximum values, this field is left blank.

   Interval Value- program intervals are measured based on minimum and maximum values (e.g. between 800 and 1000 miles) or based on a percent variance (e.g. perform by 800 miles, but it can be done up to 10% early, meaning between 720 and 800 miles). If the interval you are defining will have a percent variance, the maximum value is entered here (e.g. 800). If the interval is to be measured in minimum and maximum values, the maximum value is entered here (e.g. 1000).

   Interval Lower Limit- program intervals are measured based on minimum and maximum values (e.g. between 800 and 1000 miles) or based on a percent variance (e.g. perform by 800 miles, but it can be done up to 10% early,meaning between 720 and 800 miles). If the interval you are defining will have a percent variance, this field is left blank. If the interval is to be measured in minimum and maximum values, the minimum value (e.g. 800) is entered here.

   UOMis the unit of measure used for the interval values. You can right-click in the field and select Prompt to select the unit of measure from a list.

7. Click Enter to save the changes.
8. Click Exit five times to return to the menu.

Back to Create and change programs or Equipment Master