Enrich EMMS Online Help

Equipment specific components  

All equipment units are composed of multiple parts, many of which are tracked. Most of these parts will require replacement and/or repair over the life of the unit. All components defined for the equipment group are copied to the unit automatically. However, units might have different or additional components from those of the group.

Note that parts are automatically added to the component list when they are issued to the unit from a work order.

1. At the EMMS main menu, click the Equipment button.
   • The Display Equipment screen appears.
2. Right-click on the unit and select Action List.
   • The Equipment Actions screen appears.
3. Click Specific Components.
   • The Specific Item Components display screen appears.
4. Click Change .
   • The Specific Item Components change screen appears.
5. Click Add .
   • The Specific Item Components add screen appears.
6. Fill in the fieldsfields as required.

   Component Item identifies the specific item installed on the unit. You can right-click in the field and select Prompt to select the item from a list.

   Component Serial# is the serial number stamped on the part by its manufacturer, if tracked.

   Dept is the shop or department that installed the part. You can right-click in the field and select Prompt to select the department from a list.

   Facility is the facility that installed the part. You can right-click in the field and select Prompt to select the facility from a list.

   Install Date is the date the component was placed on the unit.

   Location is the location on the unit where the part has been installed; e.g. LF for left front, RRI for right rear inner. You can right-click in the field and select Prompt to select the location from a list.

   Removal Date is the date the component was removed from the specified equipment unit, if applicable.

7. Click Enter  to save the components.
8. Click Exit  three times to return to the Display Equipment screen.

Back to Equipment Master