Enrich EMMS Online Help

Equipment group standard parts  

Standard parts are defined at the equipment group level so that units created within the group automatically inherit the standard parts that you wish to track. For instance, if you wish to track transmissions or engines, standard parts definitions for these parts at the equipment group level will automatically give each unit within the group the item on its specific component list.

1. At the EMMS main menu, select Equipment | Equipment Groups.
   • The Display Equipment Group screen appears.
2. Right-click on the group and select Actions.
   • The Equipment Group Actions screen appears.
3. Click Standard Parts.
   • The Standard Components display screen appears.
4. Click Change .
   • The Standard Components change screen appears.
5. Click Add .
   • The Standard Components add screen appears.
6. Fill in the fieldsfields as required.

   Add To All Equipment flags whether or not new parts should be added to existing units in the group. If unchecked, the new parts will only be components of units that are added to the group in the future.

   Component Item is the item contained on the units in the group. You can right-click in the field and select Prompt to select the item from a list.

   Dept is the department or shop that repairs the part. You can right-click in the field and select Prompt to select the department from a list.

   Facility is the facility where the part is repaired. You can right-click in the field and select Prompt to select the facility from a list.

   Location is the location on the equipment units where the item is installed. It is optional. You can right-click in the field and select Prompt to select the location from a list.

   Quantity is the number of the item that are standard on the units in the equipment group, e.g. 6 tires, 4 brake shoes. Note that if Locations are being tracked, only 1 of an item will appear at each location.

7. Click Enter to save the components.
8. Click Exit three times to return to the Display Equipment Group screen.

Back to Equipment Groups or on to Equipment Master